Page Comparison

The Cisco CUCM decoder utilises the “BATS backup” capability of the CUCM. To obtain and import a BATS backup, follow these steps.

Login to the Cisco Unified Administration

Login into the “Cisco Unified CM Administration” portal from a Web Browser, note: Firefox is recommended for older Cisco CUCM’s due to HTML compatibility issues on other browsers.

Creating the backup

Select the “Export” function from “Bulk Administration” in the top menu

Enter a suitable name for the backup and press “Submit”

You should see the following message appear in the status panel

Check Scheduler

Go to the Scheduler to ensure that the backup job in progress

If the job says “Hold”, activate it by ticking the checkbox and clicking on “Activate Selected”

If the job appears to get stuck on “Pending”, us the “Cisco Unified Serviceability” interface and ensure that the AXL, BPS and TAPS services are all activated (Note: this requires Admin access)

When completed, the status will change

Downloading the backup

Select “Upload/Download” files in the “Bulk Administration” menu.

Enter the prefix you entered in 2.2 and click on “Find”

Select the backup and click on “Download Selected”

Finally, save the file on your local system to use as an import to UCentric Voice Audit.

Cisco backups performed from the standard web portal for the Cisco CUCM. This generates a .tar file.

If you want to capture actual usage of the CUCM, you can also capture the CDR data at the same time and UCentric will process this when combined with a BATS backup.

Login to the Cisco Unified Serviceability

Login into the “Cisco Unified Serviceability” portal from a Web Browser, note: Firefox is recommended for older Cisco CUCM’s due to HTML compatibility issues on other browsers.

Then select “CDR Analysis and Reporting” from the “Tools” menu.

This will open a new window, select “Export CDR/CMR” from the “CDR” menu

Select the date range (ideally more than 3 months) and click “Export to File”

This will then display the following:-

CUCM

Use an account that has administrator access to the Cisco Web Interface and navigate to the Cisco Unity Connection Administration section.

On the left-hand side tree view, locate Tools → Bulk Administration Tool

This page allows you to export the unity data, you need to select Export as your Operation. Selecting Users with Mailbox as your Object Type.

Once you have browsed and defined a filename, you can Submit to start the export process.

The CSV file that is generated can be included with a CUCM audit in order to identify users with voice mail requirements.

For call manager express you can use the CME GUI and select “Administration -> Save Router Config

Broad

Cisco Broadworks can be audited via two methods, these are:

• Using a tool called EMU if the customer has access which can then produce a (Broadsoft) JSON backup.

• A direct connection to BroadSoft using the OCI-P protocol. This relies on the customer providing the URL to the XSP server and a group admin and password for each account that requires auditing. This is entered into the UCentric SPA/ZT interface under the “Vendors” tab on the bottom-left

You can also obtain a .UCX file to drop on the UCentric SPA/ZT interface by getting the customer to perform the audit remotely as follows:-

• Obtain the latest copy of Audit.exe (located on the UCentric server at C:\Program Files (x86)\MIT Dynamic\UCentric\Voice )

• And copy onto a USB stick, or provide to the customer using your usual secure methods

Use this command line:-

audit.exe broadworks -i hostName-u username -p password-o customerName.ucx

Replace hostName with the URL of the Broadworks XSP server (including HTTPS:// or HTTP://)

Replace username with the Broadworks Group Admin username

Replace password with the BroadWorks Group Admin password

Replace customerName with the name of the customer, or another memorable reference as this what the generated file will be

Avaya CM/Aura/Definity can be audited direct from the UCentric SPA/ZT interface (using the “Vendors” button on the bottom-left), via an applet provided by MIT or via collecting exports from the Avaya System Administration tool (ASA) and importing them. Using the SPA/ZT direct method or Audit Applet (which is the same thing in effect) is the recommended method for acurate and detailed audits.

Obtain the latest copy of Audit.exe (located on the UCentric server at C:\Program Files (x86)\MIT Dynamic\UCentric\Voice or speak to the MIT team), and copy onto a USB stick, or provide to the customer using your usual secure methods

Use this command line:-

audit.exe avaya -i x.x.x.x -u username -p password-o customerName.ucx

Replace x.x.x.x with the IP Address of the on-net (or Internet visible) Avaya CM - Note: Port 5022 must be visible.

Replace username with the Avaya ASA Admin username

Replace password with the Avaya ASA Admin password

Replace customerName with the name of the customer, or another memorable reference as this what the generated file will be called

The .ucx file can then be dropped on the UCentric Auditing SPA/ZT interface.

• Install ASA v6 (or latest version) + service pack (if not already installed)

• Create an empty folder on your Desktop with the name of the site (e.g. “MIT Test”)

• Connect to your Avaya and select the “Advanced” panel on the left, then click on “Export Data”

• Repeat this step for every form available, select the form from the list

• Then click next then click the >> so that all fields are in the right-hand box

• Then click Next and then click on the three dots next to the filename and select your folder on the desktop, leaving the filename as-is.

• Then click Next, Next, Finish andrepeat this for all forms in the list.

• You can see the progress in the “Schedule” tab at the bottom of panel. Wait until all jobs are completed. Note: Errors will occur for unlicensed or missing options – Ignore this.

• Select “Advanced” then “Report”

• Repeating this step for this list of reports (Paste each of these into the selection box as not all are listed in the drop-down)

  • display system-parameters customer-options

  • list hunt-group

  • list call-forwarding

  • list registered-ip-stations

 

• Select the report from the list and choose“Export screen capture to file”

• Select  the 3 dots next to the filename and use same folder as before

• Once all files have been captured. Zip the folder up and this can then be used with the SPA/ZT tool.

Aura expand
params JTdCJTIydGl0bGUlMjIlM0ElMjJBdmF5YSUyMElQJTIwT2ZmaWNlJTIyJTdE

Perform a backup as described here: https://pbxbook.com/ipoffice/iposcimp.html

Login to IP Office Manager 
Click on File ➤ Import/Export ➤ Export...

Select the Check Box for All of the configuration, and click OK as shown below.

Aura expand
params JTdCJTIydGl0bGUlMjIlM0ElMjJBdmF5YSUyRk5vcnRlbCUyMEJDTSUyMiU3RA==

The Notel/Avaya BCM audit can be imported from either an Excel config file that looks like this:-

Aura expand
params JTdCJTIydGl0bGUlMjIlM0ElMjJOb3J0ZWwlMjBNZXJpZGlhbiUyRk9wdGlvbiUyMDExJTJGQ1MxSyUyMiU3RA==

MIT can provide a list of commands that can be manually run on the CS1K to capture the information required for an audit

Below are a list of commands that should be run via the terminal interface for the CS1K using PuTTy and saved to a txt file which can then be ingested by UCentric.

You must first log into the terminal interface before running these commands.

Please contact us for the instructions as we do not make this information publicly available.

NEC NEAX systems can be imported from a Standard XLSX backup that has the following tabs:-

You can import the XLSX file into UCentric from within the site manager, Zero-Touch SPA

IS3000/Sopho systems can be audited via a backup import with some additional pre-import steps. The backup file supported is usually a rar file that contains .POM files.

A .POM file viewer app must be used to carry out the steps below before importing the file into UCentric.

1. Extract the “.POM” files from an archive into their own folder.

2. Open the LLxxxx.POM file in the POM view program

3. Click “File”, “Report” and select “Full Report”, “Report in XML” and “all in one file (is3000.xml)”

NOTE: The iS3000.xml file will be created in the XML subdirectory of wherever your POM file is located.

Once you have the XML file, you can use the UCentric Zero Touch (SPA) interface or standard web interface to add a new site/import the file like any other audit.

Please note, MIT does not yet have complete instructions for obtaining the supported file format for NEC systems however the guidance below should be used in the meantime and this will be updated once instruction

The supported format is a ZIP file of CSV files

Several NEC systems that are managed by the PCPro application can be audited by via backup import.

The database backup is obtained from the PCPro app Via the export/backup/External storage option shown below.

The backup will be saved as a PCPX file for SV9100 systems, on earlier systems (8100, UX5000) the file format is different however this can be converted into the pcpx format via the PCPro app. This is done via the Tools>Import menu and then selecting the option for the relevant file you have.

Once done you can use the PCPX database to generate a ZIP file PCPro app that contains a reports folder within the and within the reports folder will be individual CSV files.

1. Login with username/password to PCPro

2. Click, File, Open and then select the .pcpx file

3. Click Reports on the top tab-bar

4. Click System Data

5. Click Select All, and ensure that Export as CSV is selected

6. In Export to Directory Browse to a new empty folder

7. Click Generate

8. Once completed, exit the app, and then zip the entire folder up

Image Added

Image Added

The ZIP file can be imported into UCentric via the Zero-touch app.